Mitutoyo CRYSTA-Apex S9108

Mitutoyo CRYSTA-Apex S9108, Series 191 S900 Coordinate Measuring Machine, 0.000004in

Call for Quote
Get a Quote Online!

High-performance, low-price CNC coordinate measuring machine meets global standards

The CRYSTA-Apex S is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L/1000)μm [500/700/900 Series]. Comparing the CRYSTA-Apex S with CMMs offering *E0,MPE of approximately (2.5+4L/1000)µm where a required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8”(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex S the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2” (766mm). The higher accuracy specification of the CRYSTA-Apex S therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.

  • Bridge Type
  • Guide Method: Air bearing on each axis
  • Length Standard: Linear encoder
Resolution 0.000004in (0.0001mm)
X-axis 35.4in (900mm)
Y-axis 39.4in (1000mm)
Z-axis 31.5in (800mm)
Air Pressure 0.4MPa
Air Consumption 60L/min
Max Drive Speed 3D 20.43in/s (519mm/s)
Max Acceleration 3D 0.17G (1732mm/s2)
Work Table Size 42.51in x 67.71in (1080mm x 1720mm)
Work Table Material Granite
Max Height 39.36in (1000mm)
Max Weight 3968lbs (1500kg)
Dimensions 65.74W x 76.77D x 123.22Hin (1670 x 1950 x 3130mm)
Mass 6389lbs (2898kg)

We Also Recommend